2010 Polaris Outlaw 525 IRS Owners Manual - Page 156
2010 Polaris Outlaw 525 IRS Manual
Page 156 highlights
Maintenance Front Suspension Suspension Set-Up 1. Position the vehicle on a level surface. 2. Stop the engine. 3. Elevate the front of the vehicle by placing a suitable stand under the frame. The tires should be barely touching the ground and the suspension should be at full rebound. 4. Measure the distance from the ground to the bottom of the lower front bumper bolt. Note this measurement for later use. 5. Remove the stand and have a rider sit comfortably on the seat with hands on the handlebars. 152
152
Maintenance
Front Suspension
Suspension Set-Up
1.
Position the vehicle on a level surface.
2.
Stop the engine.
3.
Elevate the front of the vehicle by placing
a suitable stand under the frame. The tires
should be barely touching the ground and
the suspension should be at full rebound.
4.
Measure the distance from the ground to
the bottom of the lower front bumper bolt.
Note this measurement for later use.
5.
Remove the stand and have a rider sit
comfortably on the seat with hands on the
handlebars.