2010 Polaris Outlaw 525 IRS Owners Manual - Page 122
2010 Polaris Outlaw 525 IRS Manual
Page 122 highlights
Maintenance Lights Headlight Assembly Replacement 1. Remove the front cover. 2. Remove the wire harness connector from the headlights. 3. Remove the two retaining brackets and the adjuster screw. 4. Remove the headlamp. 5. Install the new headlamp, placing it in the slots on the frame tabs. Secure the headlamp with the retaining brackets. 6. Install the adjuster screw, leaving it loose so the headlight can be adjusted. 7. Connect the wire harness to the headlamp. Reinstall the front cover. 8. Adjust the lamp as needed (see page 115), then tighten the adjuster screw. 118
118
Maintenance
Lights
Headlight Assembly Replacement
1.
Remove the front cover.
2.
Remove the wire harness connector from the headlights.
3.
Remove the two retaining brackets and the adjuster screw.
4.
Remove the headlamp.
5.
Install the new headlamp, placing it in the slots on the frame tabs. Secure the headlamp
with the retaining brackets.
6.
Install the adjuster screw, leaving it loose so the headlight can be adjusted.
7.
Connect the wire harness to the headlamp. Reinstall the front cover.
8.
Adjust the lamp as needed (see page 115), then tighten the adjuster screw.