2010 Polaris Outlaw 525 IRS Owners Manual - Page 108
2010 Polaris Outlaw 525 IRS Manual
Page 108 highlights
Maintenance Engine Oil Change Changing Oil Filters 1. Place a drain pan under the engine. 2. Remove the four oil filter cover screws (1). Remove the covers. 3. Using circle clip (snap ring) pliers, pull the oil filter inserts (2) out of the housing. 4. Thoroughly clean the engine casing, filter covers and sealing surfaces of the O-rings. Check the O-rings. If damaged, install new O-rings. 5. Fill each oil filter with oil. Install the long filter at the front of the filter box. Install the short filter at the rear of the box. 1 2 104
104
Maintenance
Engine Oil Change
Changing Oil Filters
1.
Place a drain pan under the engine.
2.
Remove the four oil filter cover screws (1).
Remove the covers.
3.
Using circle clip (snap ring) pliers, pull the
oil filter inserts (2) out of the housing.
4.
Thoroughly clean the engine casing, filter
covers and sealing surfaces of the O-rings.
Check the O-rings. If damaged, install new
O-rings.
5.
Fill each oil filter with oil. Install the long
filter at the front of the filter box. Install the
short filter at the rear of the box.
1
2