2006 Polaris Ranger XP 700 EFI 4x4 Owners Manual - Page 34
2006 Polaris Ranger XP 700 EFI 4x4 Manual
Page 34 highlights
Switches FEATURES AND CONTROLS Ignition Switch (1) The ignition switch is a three-position, key-operated switch. The key can be removed from the switch when it is in the OFF position. OFF Engine off. All electrical circuits are off except Acc. 12V. 2 3 ON/RUN Electrical circuits are on. Electrical equipment can be used. START Electric starter is engaged by holding ignition switch key in this position. Upon release, the key will return to the ON/RUN position. 1 WARNING Leaving the keys in the ignition can lead to unauthorized use of the vehicle resulting in serious injury or death. Always remove the ignition key when the vehicle is not in use. Light Switch (2) A The ignition switch key must be in the ON/RUN position to operate the headlights. The switch has three B positions: A: High Beam C B: Low Beam C: Off AWD/Differential Lock Switch (3) D AWD The AWD/Differential Switch has three positions: E D: AWD E: Differential Lock (2WD) F: Off (1WD) F Press the top of the rocker switch to engage AWD. See page 51 for AWD operating instructions. Move the rocker switch to the center position to lock the differential and return to 2WD. See page 50 for Differential Lock operating instructions. Press the bottom of the switch to unlock the differential and return to 1WD. 31