2004 Polaris Sportsman 700 Owners Manual - Page 113

MAINTENANCE AND LUBRICATION Cleaning and Storage Storage Tips Battery Maintenance (Conventional) Remove the battery and add distilled water to the proper level. Do not use tap water, which may contain minerals that reduce battery life. Apply dielectric grease to the terminal bolts and terminals. Charge the battery at 1.4 amps or less until the specific gravity of each cell is 1.265 or greater. Store the battery in a cool, dry place. Charge can be maintained easily by using Polaris Battery Tendert charger (PN 2871076) or by charging about once a month to make up for normal self-discharge. Battery Tendert can be left connected during the storage period, and will automatically charge the battery if the voltage drops below a pre-determined point. Check the fluid level monthly. Battery Maintenance (Sealed) Remove the battery and recharge it as outlined on page 105. Store the battery in a cool, dry place. Engine Anti-Freeze Test engine coolant strength and change if necessary. Coolant should be replaced every two years. Storage Area/Covers Set the tire pressure and safely support the ATV with the tires 1-2" off the ground. Be sure the storage area is well ventilated, and cover the machine with a genuine Polaris ATV cover. NOTE: Do not use plastic or coated materials. They do not allow enough ventilation to prevent condensation, and may promote corrosion and oxidation. 110