2009 Kawasaki MULE 4010 4x4 Owners Manual - Page 87

2009 Kawasaki MULE 4010 4x4 Manual

Page 87 highlights

86 MAINTENANCE AND ADJUSTMENT • Remove the filler plug. WARNING When draining or filling the transmission case, be careful that no oil gets on the tires or rims. Oil on tires can make them slippery which can cause an accident and injury. Clean off any oil that inadvertently gets on them with soap and water. Transmission case oil is a toxic substance. Dispose of used oil properly. Contact your local authorities for approved disposal methods or possible recycling. the oil has completely drained out, install the • After drain plug with its gasket. Tighten it to the spec- Transmission Case Oil Capacity KAF620M/N: 2.5 L (2.6 US qt) KAF620P: 2.2 L (2.3 US qt) • Install the filler plug. j • ified torque. If the gasket is damaged, replace it with a new one. Fill the transmission case up to the "H" (High) line on the dipstick with a good quality oil as specified in the table. Tightening Torque Drain Plug: 15 N·m (1.5 kgf·m, 11 ft·lb) Transmission Case Oil Type API "GL-5" Hypoid gear oil above 5°C (41°F) SAE 90 below 5°C (41°F) SAE 80

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135

86
MAINTENANCE AND ADJUSTMENT
j
Remove the filler plug.
WARNING
When draining or filling the transmission
case, be careful that no oil gets on the tires
or rims. Oil on tires can make them slippery
which can cause an accident and injury.
Clean off any oil that inadvertently gets on
them with soap and water.
Transmission case oil is a toxic substance.
Dispose of used oil properly. Contact your
local authorities for approved disposal meth-
ods or possible recycling.
After the oil has completely drained out, install the
drain plug with its gasket. Tighten it to the spec-
ified torque. If the gasket is damaged, replace it
with a new one.
Fill the transmission case up to the “H” (High) line
on the dipstick with a good quality oil as specified
in the table.
Tightening Torque
Drain Plug: 15 N·m (1.5 kgf·m, 11 ft·lb)
Transmission Case Oil Type
API “GL-5” Hypoid gear oil
above 5°C (41°F) SAE 90
below 5°C (41°F) SAE 80
Transmission Case Oil Capacity
KAF620M/N:
2.5 L (2.6 US qt)
KAF620P:
2.2 L (2.3 US qt)
Install the filler plug.