2009 Kawasaki MULE 4010 4x4 Owners Manual - Page 103
2009 Kawasaki MULE 4010 4x4 Manual
Page 103 highlights
102 MAINTENANCE AND ADJUSTMENT CAUTION If dirt gets into the belt drive torque converter, excessive wear and loss of driving power may result. away the remaining dust by applying com• Blow pressed air from the inside to the outside (from the • clean side to the dirty side). Inspect the element material for damage. If any part of the element is damaged, the element must be replaced. żElement installation is performed in the order of removal. NOTE reverse j Element Cleaning the element (see Element Removal). • Remove Remove the urethane foam element from the pa• per element. the foam element in a bath of high flash • Clean -point solvent using a soft bristle brush. it dry in a clean towel. Do not wring the • Squeeze element or blow it dry; the element can be dam- • aged. Inspect the foam element for damage. If it is torn, punctured, or hardened, replace it. żReplace the foam element after cleaning it five times or if it is damaged. the paper element by tapping it lightly to • Clean loosen dust. NOTE
![](/manual_guide/autos/2009-kawasaki-mule-4010-4x4-owners-manual-e00d075/103.png)