2012 Ducati Monster 696 Owners Manual - Page 107

2012 Ducati Monster 696 Manual

Page 107 highlights

E General cleaning To preserve the original shine on metal surfaces and paintwork, wash and clean your motorcycle at regular intervals depending on the type of use and according to the particular road conditions. Use specific products, where possible biodegradable. Avoid aggressive detergents or solvents. Only use water and neutral soap to clean the Plexiglas and the seat. Only use water and neutral soap to clean the Plexiglas and the seat. Clean the aluminium components regularly and by hand. Use specific detergents for aluminium that do NOT contain abrasive substances or caustic soda. If parts of the engine are unusually dirty or greasy, use a degreasing agent, avoiding contact with transmission components (chain, front and rear sprockets, etc.). Rinse with warm water and dry all surfaces with chamois leather. There may be loss of braking efficiency immediately after washing the motorcycle. Never grease or lubricate the brake discs as this would cause loss of braking effectiveness. Clean the discs with an oil-free solvent. Warning Do not use abrasive or steel wool sponges, use only a soft cloth. The warranty does not apply to motorcycles where there is evidence of poor maintenance. Note The headlight might fog up due to washing, rain or moisture. Switch headlight on for a short time to dry up any condensate. Warning Do not wash your motorcycle immediately after use, as marks can form due to evaporation of the water on hot surfaces. Never clean the motorcycle using hot or highpressure water jets. Cleaning the motorcycle with a high pressure water jet may lead to seizure or serious faults in the front fork, wheel hub assembly, electric system, headlight (fogging), front fork seals, air inlets or exhaust silencers, with consequent loss of safety. Important 106

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139

106
E
General cleaning
To preserve the original shine on metal surfaces and
paintwork, wash and clean your motorcycle at regular
intervals depending on the type of use and according to the
particular road conditions. Use specific products, where
possible biodegradable. Avoid aggressive detergents or
solvents.
Only use water and neutral soap to clean the Plexiglas and
the seat.
Only use water and neutral soap to clean the Plexiglas and
the seat.
Clean the aluminium components regularly and by hand. Use
specific detergents for aluminium that do NOT contain
abrasive substances or caustic soda.
Note
Do not use abrasive or steel wool sponges, use only a
soft cloth.
The warranty does not apply to motorcycles where there is
evidence of poor maintenance.
Important
Do not wash your motorcycle immediately after use,
as marks can form due to evaporation of the water on hot
surfaces. Never clean the motorcycle using hot or high-
pressure water jets. Cleaning the motorcycle with a high
pressure water jet may lead to seizure or serious faults in the
front fork, wheel hub assembly, electric system, headlight
(fogging), front fork seals, air inlets or exhaust silencers, with
consequent loss of safety.
If parts of the engine are unusually dirty or greasy, use a
degreasing agent, avoiding contact with transmission
components (chain, front and rear sprockets, etc.).
Rinse with warm water and dry all surfaces with chamois
leather.
Warning
There may be loss of braking efficiency immediately
after washing the motorcycle. Never grease or lubricate the
brake discs as this would cause loss of braking
effectiveness.
Clean the discs with an oil-free solvent.
Warning
The headlight might fog up due to washing, rain or
moisture.
Switch headlight on for a short time to dry up any
condensate.