2008 Ducati Superbike 848 Owners Manual - Page 76
2008 Ducati Superbike 848 Manual
Page 76 highlights
Changing the high and low beam bulbs Before replacing a burnt-out bulb, make sure that the new one matches the voltage and wattage specifications in the "Electrical System" paragraph on page 99. Always check that the new bulb works before refitting removed parts. Figure fig. 62 shows the position of the low beam (LO), high beam (HI) and side light (1) bulbs. 1 E LO Headlight To gain access to the left-hand bulb, remove the cover (2) by pressing the lever (A). Rotate the locking ring nut (3) of the upper bulb body anticlockwise and extract the burnt-out bulb. Replace with a bulb of equal rating. On refitting, rotate the locking ring nut (3) clockwise to secure the bulb in place. The right-hand bulb is replaced in the same way. HI fig. 62 A 3 2 fig. 63 76