2008 Ducati Superbike 848 Owners Manual - Page 53
2008 Ducati Superbike 848 Manual
Page 53 highlights
Rear shock absorber adjusters (fig. 42) The shock absorber has external adjusters that enable you to adjust the suspension to suit the load on the motorcycle. Adjuster (1), located on the left-hand side at the point at which the shock absorber is fixed to the swingarm, controls rebound damping. The adjuster (2) on the shock absorber reservoir controls compression damping. Turn the adjusters (1 and 2) clockwise to stiffen the damping or anti-clockwise to soften it. STANDARD setting: from the fully closed position (turned fully clockwise), unscrew: adjuster (1) by 2 turns; adjuster (2) by 2 turns. Spring preload: 20 mm. The two nuts (3) on the upper part of the shock absorber serve to adjust the preload on the external spring. To change spring preload, slacken off the upper lock nut. Then tighten or loosen the lower nut to increase or decrease spring preload as required. 2 1 3 E fig. 42 53