2008 Ducati Superbike 848 Owners Manual - Page 27

Clock setting To set the clock, select the "TIME Set" page from the menu. From this page, if you press button (1, fig. 8) in position B "▼" for 3 seconds, you enter clock setting mode. On entering this function, the message "AM" flashes on the display; if you press button (1, fig. 8) in position B "▼", the message "PM" flashes on the display; pressing button (1, fig. 8) in position B "▼" a second time returns you to the previous step (if the time is 00:00, when you switch from AM to PM the time 12:00 will appear); if you press the button (1, fig. 8) in position A "▲", you can set the hours, which start flashing. Each time you press the button in position B "▼", the count advances cyclically in steps of 1 hour; if you hold the button down in position B "▼", the count advances cyclically in steps of 1 hour every second (when the button is held down continuously, the hours do not flash). If you press button (1, fig. 8) in position A "▲", you enter the minutes setting mode and the minute digits will start flashing. Each time you press the button in position B "▼", the count advances cyclically in steps of 1 minute; if you hold the button down in position B "▼", the count advances cyclically in steps of 1 minute every second. If the button is held pressed in position B "▼" for more than 5 seconds, the minutes advance by 1 every 100 ms (when the button is held in position B "▼" continuously, the seconds do not flash). If you switch the button to position A "▲", the system exits setting mode and displays the newly set time. flashing B B A B A B A flashing B A flashing setting A flashing E A setting fig. 21 27