2008 Ducati Superbike 848 Owners Manual - Page 45
2008 Ducati Superbike 848 Manual
Page 45 highlights
Adjusting the position of the gearchange and rear brake pedals (fig. 33 and fig. 34) The position of the gearchange and rear brake pedals in relation to the footrests can be adjusted to suit the requirements of the rider. To adjust the position, proceed as follows: restrain the tie-rod (1) and slacken the locknuts (2) and (3). Notes The locknut (2) has a left-hand thread. Turn the tie-rod (1) using an open-ended wrench on the flats to move the gearchange pedal to the required position. Tighten the two lock nuts (2) and (3) onto the rod. E 2 1 3 fig. 33 45
45
E
Adjusting the position of the gearchange
and rear brake pedals
(fig. 33 and fig. 34)
The position of the gearchange and rear brake pedals in
relation to the footrests can be adjusted to suit the
requirements of the rider.
To adjust the position, proceed as follows:
restrain the tie-rod (1) and slacken the locknuts (2) and (3).
Notes
The locknut (2) has a left-hand thread.
Turn the tie-rod (1) using an open-ended wrench on the flats
to move the gearchange pedal to the required position.
Tighten the two lock nuts (2) and (3) onto the rod.
2
1
3
fig. 33