2003 Ducati Superbike 999R Owners Manual - Page 123

Rear brake pedal adjustment (fig. 27) To set the rear brake pedal, loosen check nut (1). Turn pedal travel adjusting screw (2) until pedal is in the desired position. Tighten check nut (1). Work pedal by hand to make sure it has 1.5 - 2 mm free play before brake begins to bite. If not so, set the length of cylinder linkage as follows. Loosen the check nut (3) on cylinder linkage. Tighten linkage into fork (4) to increase play, or unscrew linkage to reduce it. Tighten check nut (3) and check pedal free play again. For a fine adjustment of rear brake pedal position, slacken the retaining screw of the brake pedal (5) and slide the pedal inside the bracket slot (6) until setting it in the desired position. Tighten the retaining screw. 6 5 4 3 E 2 1 fig. 27 33