2010 BMW 528 Owner's Manual - Page 43

Opening, closing Sliding visor You can move the sliding visor independently with the sunroof closed or raised. > Slide the switch back to the resistance point. The sliding visor opens as long as you keep the switch in this position. > Briefly press the switch back beyond the resistance point. The sliding visor will open automatically. Briefly pressing the switch stops the motion. You can close the sliding visor in a similar manner by sliding the switch forwards. Each time the panorama glass sunroof is completely opened or closed, it stops in the comfort position. If desired, continue the motion following this with the switch. Pinch protection system If the panorama glass sunroof or sliding visor encounter resistance when closing from roughly one third of the sunroof opening or when closing from the raised position, the closing action is interrupted and the panorama glass sunroof and sliding visor reopen a little. Despite the pinch protection system, inspect the sunroof's travel path prior to closing it, as the safety system might fail to detect certain kinds of obstructions, such as very thin objects, and the sunroof would continue closing.< Controls Reference Mobility 41 Communications Entertainment Navigation Driving tips Panorama glass sunroof With the sliding visor open, proceed as described under Sliding visor. For information on using Convenient opening and closing at the door lock or with the remote control, refer to page 28 or 30. For information on comfort closing with Comfort Access, refer to page 37. Closing without pinch protection system In case of danger from outside, slide the switch forward beyond the resistance point and hold. The roof closes without the pinch protection system. Opening and closing sunroof and sliding visor together Briefly press the switch beyond the resistance point twice consecutively. Briefly pressing the switch stops the motion. Following interruptions in electrical power supply After a power loss, the sunroof may only respond to the raise command. Then have the system initialized. BMW recommends having this work done by your BMW center. Comfort modes > Press the switch twice with the sunroof open: The sunroof is raised. > When the sunroof is raised, briefly press the switch twice in the opening direction: The sunroof is opened all the way. Moving manually* In the event of an electrical malfunction, you can move the sunroof manually. Comfort position The sunroof is not completely open in the comfort position. This reduces the wind noises in the interior. Online Edition for Part no. 01 41 2 602 678 - © 08/09 BMW AG At a glance