2010 BMW 528 Owner's Manual - Page 100
2010 BMW 528 Manual
Page 100 highlights
Technology for comfort, convenience and safety Activating BMW Night Vision 1. Turn the light switch to position 2 or 3, refer to page 100. 2. With low beams switched on: > Press the button. Depending on the vehicle's equipment, the location of the button may differ somewhat. > Press the button. > Via iDrive, refer to Selecting settings. Selecting settings For iDrive details, refer to page 16. 1. Activate BMW Night Vision. 2. Press the controller. 3. Open the desired menu item. > "Brightness" > "Contrast" > "Zoom & Curve mode" > Press one of the programmable buttons on the steering wheel. The image will be displayed on the Control Display after a few seconds. Depending on the last mode selected, either the normal or full screen image will be displayed. The settings are stored for the remote control currently in use. To exit the menu: The image automatically disappears after approx. 5 seconds. Cleaning camera Due to the system's need to adjust periodically, a still image is displayed at certain intervals for fractions of a second. This is normal and not an indication of a problem. To prevent driving without headlamps, at a speed of more than approx. 3 mph/5 km/h and when dark, the thermal image on the Control Display is only shown when the low beams are on. The function of the camera may be affected by heavy rain and fog, dirt, snow or ice on the lens. When this occurs, the displayed image on the Control Display may become gray. To minimize icing, the camera lens is automatically heated. However, it may be necessary to clean the camera lens manually under severe weather conditions. When doing so, cautiously Deactivating BMW Night Vision > Press the button. > Press the button on the steering wheel. 98 Online Edition for Part no. 01 41 2 602 678 - © 08/09 BMW AG