2010 BMW 528 Owner's Manual - Page 237

> When mounted at an angle, the tow bar will exert lateral forces, tending to push the vehicle sideways. Only attach the tow bar to the tow fittings, as attachment to other vehicle parts can lead to damage.< Tow-starting Do not tow-start the vehicle if possible, but instead start the engine by means of jump starting, refer to page 232. With a catalytic converter, tow-starting should only be carried out with the engine cold, and with automatic transmissions, the engine cannot be started by towstarting. 1. Switch on the hazard warning flashers, comply with country-specific regulations. 2. Switch on the ignition, refer to page 57. 3. Shift into 3rd gear. 4. Tow-start with the clutch completely depressed and slowly release the clutch. After the engine starts, immediately depress the clutch again completely. 5. Stop at a suitable location, remove the tow bar or rope and switch off the hazard warning flashers. 6. Have the vehicle checked. When starting off in the towing vehicle, make sure that the tow rope is taut. To avoid jerking and the associated stresses on vehicle components when towing, always use nylon ropes or nylon straps. Only attach tow ropes to the tow fittings, as attachment to other vehicle parts can lead to damage.< With tow truck Have the BMW transported with a tow truck with a so-called lift bar or on a flat bed. With a tow truck: xDrive Do not tow a BMW with xDrive with just the front or rear axle raised, otherwise the wheels could lock up and the transfer case could be damaged.< 235 Online Edition for Part no. 01 41 2 602 678 - © 08/09 BMW AG Reference Have the BMW transported only on a flatbed surface. Mobility Communications Entertainment Navigation Driving tips Controls With tow rope At a glance