2010 BMW 528 Owner's Manual - Page 225
2010 BMW 528 Manual
Page 225 highlights
High beams H7 bulb, 55 watts 1. Turn the bulb holder to the left and remove. Access to lamps The illustration shows the left-hand side of the engine compartment. 2. Remove and replace the bulb. 1 2 Cover cap for parking and roadside parking lamps, daytime running lamps Sealing cap for turning lamps* Parking and roadside parking lamps In the event of a malfunction, please go to your BMW center or a workshop that works according to BMW repair procedures with correspondingly trained personnel. To remove the covers: > Parking lamps and roadside parking lamps, daytime running lamps: turn the cover cap to the left and remove. > Turning lamps: turn the sealing cap to the left and remove. Xenon lamps* The service life of these bulbs is very long and the probability of a failure is very low, provided that they are not switched on and off an unusual number of times. If one of these bulbs should nevertheless fail, it is possible to continue driving with great caution using the fog lamps, provided traffic laws in your area do not prohibit this. Have work on the xenon lighting system performed only by your BMW center or a workshop that works according to BMW repair procedures with correspondingly trained personnel. Due to the high voltage present in the system, there is a danger of fatal injuries when work is carried out improperly.< H8 bulb, 35 watts 1. Turn the bulb in the direction of the arrow, in the opposite direction on the other side, and remove. Turning lamps* H3 bulb, 55 watts 223 Online Edition for Part no. 01 41 2 602 678 - © 08/09 BMW AG Reference Mobility 2. Remove the connector and replace the bulb. Communications Entertainment Parking lamps and roadside parking lamps, daytime running lamps Navigation Driving tips Controls At a glance