Zanussi ZDF26004XA User Manual - Page 8

• The indicator flashes. • The display shows the current setting: - = rinse aid empty notification activated. - = rinse aid empty notification deactivated. 2. Press to change the setting. 3. Press on/off to confirm the setting. When rinse aid chamber is empty, the rinse aid indicator is on prompting to refill the rinse aid. If you are using multi-tabs containing rinse aid and you are satisfied with the drying result, you can deactivate the notification. However, we recommend that you always use rinse aid for best drying performance. If you use standard detergent or multitabs without rinse aid, activate the notification to keep the rinse aid refill indicator active. HOW TO DEACTIVATE AIRDRY AirDry improves the drying results with less energy consumption. While the drying phase operates, the device opens the appliance door. The door is then kept ajar. By default, AirDry is activated with all programmes excluding (if applicable), but it is possible to deactivate it. Make sure the appliance is in user mode. 1. Press . • The indicators and are off. • The indicator flashes. • The display shows the current setting: = AirDry activated. 2. Press to change the setting. = AirDry deactivated. 3. Press on/off to confirm the setting. CAUTION! If children have access to the appliance, it is advised to deactivate AirDry as opening the door may pose a danger. BEFORE FIRST USE 1. Make sure that the current level of the water softener agrees with the hardness of the water supply. If not, adjust the level of the water softener. Contact your local water authority to know the water hardness in your area. 2. Fill the salt container with special salt for dishwasher. 3. Fill the rinse aid dispenser with special rinse aid for dishwasher. 4. Open the water tap. 5. Start a programme to remove any processing residuals that can still be inside the appliance. Do not use detergent and do not load the baskets. 8