Zanussi ZDF26004XA User Manual - Page 16
Technical Information
View all Zanussi ZDF26004XA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Problem Possible cause and solution The interior of the appliance is wet. Unusual foam during washing. Traces of rust on cutlery. There are residues of detergent in the dispenser at the end of the programme. Odours inside the appliance. Limescale deposits on the tableware, on the tub and on the inside of the door. Dull, discoloured or chipped tableware. • This is not a defect of the appliance. it is caused by the humidity in the air that condenses on the walls. • Use the detergent for dishwashers only. • There is a leak in the rinse aid dispenser. Contact an Author- ised Service Centre. • There is too much salt in the water used for washing. Refer to "The water softener". • Silver and stainless steel cutlery were placed together. Avoid to put silver and stainless steel items close together. • The detergent tablet got stuck in the dispenser and therefore was not completely washed away by water. • Water cannot wash away the detergent from the dispenser. Make sure that the spray arm is not blocked or clogged. • Make sure that items in the baskets do not impede the lid of the detergent dispenser from opening. • Refer to "Internal cleaning". • The level of salt is low, check the refill indicator. • The cap of the salt container is loose. • Your tap water is hard. Refer to "The water softener". • Even using multi-functional tabs use salt and set regeneration of the water softener. Refer to "The water softener". • If lime scale deposits still remain, clean the appliance with appliance cleaners which are particularly suitable for this purpose. • Try different detergent. • Contact the detergent manufacturer. • Make sure that only dishwasher-safe items are washed in the appliance. • Load and unload the basket carefully. Refer to basket loading leaflet. • Place delicate items in the upper basket. Refer to "Before first use", "Daily use" or "Hints and tips" for other possible causes. TECHNICAL INFORMATION Dimensions Electrical connection 1) Water supply pressure Water supply Width / height / depth (mm) Voltage (V) Frequency (Hz) Min. / max. bar (MPa) Cold water or hot water 2) 600 / 850 / 625 220 - 240 50 0.5 (0.05) / 8 (0.8) max 60 °C 16