Vtech CLP99486 User Manual - Page 141

Appendix Add and register handsets/headsets/speakerphones If registration fails, the system will automatically try to register again. If registration fails after the third try, Registration failed appears on both screens. The handset shows To register HS, see manual. and the telephone base returns to idle mode. This may take up to five minutes to occur. Please start again from Step 1. Method 2: 1. Press and hold /HANDSET LOCATOR on the telephone base for about four seconds and it shows Registering... Please wait. 2. Press QUIET # on the handset. The handset shows Registering... Please wait. If the registration is successful, both the handset and the telephone base screens display HANDSET X Registered �(HANDSET represents the handset name, X represents the handset number). Both the handset and the telephone base beep. The handset is now registered with the telephone base. If registration fails, Registration failed appears on both screens. The handset shows To register HS, see manual. and the telephone base returns to idle mode. This may take up to five minutes to occur. Please start again from Step 1. NOTES: • You cannot register a handset if any other system handset is in use. • If you try to register more than 12 handsets to the telephone base, the telephone base shows Registration slots are full and sounds two beeps. 135