URC TKP-7600 Owners Manual - Page 8
Wall Mounting
View all URC TKP-7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Wall Mounting Follow the steps below for installation: 1. Make sure the dual-gang opening is fitted with the standard two-gang retro-box (available from the local electrical supplier/store) 2. Mount the wall-plate to the two-gang retro-box 3. Connect the Ethernet cable to the rear of the supplied TKP-7600 wall-plate 4. The TKP-7600 easily snaps into the wall-plate Note: the keypad mount rotates to accommodate landscape or portrait viewing modes. The viewing mode is set from within the URC Accelerator software. Page 5
Page 5
Wall Mounting
Follow the steps below for installation:
1.
Make sure the dual-gang opening is fitted with the standard two-gang retro-box (available
from the local electrical supplier/store)
2.
Mount the wall-plate to the two-gang retro-box
3.
Connect the Ethernet cable to the rear of the supplied TKP-7600 wall-plate
4.
The TKP-7600 easily snaps into the wall-plate
Note:
the keypad mount rotates to accommodate landscape or portrait viewing modes. The
viewing mode is set from within the URC Accelerator software.