TASCAM MX CONNECT wner s Manual - Page 25
Making TASCAM EZ CONNECT settings, Setting the SOURCE SELECT area
View all TASCAM MX CONNECT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
3 - TASCAM EZ CONNECT Making TASCAM EZ CONNECT settings Use of TASCAM EZ CONNECT is enabled by making settings on the EZ CONNECT page in TASCAM MX CONNECT. Setting the SOURCE SELECT area Setting the input sources in the SOURCE SELECT area NOTE If the EZ CONNECT page SOURCE SELECT area (4) CONTROL TARGET setting is OFF, the Source Selection Screen will not appear in TASCAM EZ CONNECT. Moreover, if the CONTROL TARGET source is selected, but all source settings are OFF, the Source Selection Screen will not appear in TASCAM EZ CONNECT. 1. Tap the b under CONTROL TARGET to open the MIX tab list. (Default: OFF) 2. Select the MIX tab to be operated with TASCAM EZ CONNECT. This enables selection of the input sources to be operated with TASCAM EZ CONNECT. ATTENTION Do not set the same MIX channels in multiple areas. Doing so will make it not work properly. 3. Tap source selection 1 - 8 and select the input sources to be operated with TASCAM EZ CONNECT. 4. After launching and logging into TASCAM EZ CONNECT, the input sources selected in step 3 will be shown. 5. Tap the button for the source you want to input. Only the sound assigned to the lit button will be input. Other input sources will be muted. NOTE When selecting input channels, USB IN1&2 cannot be selected at the same time as USB IN1 or USB IN2. TASCAM MX CONNECT 25