Sub-Zero BI-36S Built-In Use & Care Guide - Page 26
Lighting Information, Built-In Use & Care - parts
View all Sub-Zero BI-36S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Built-In Use & Care 26 Lighting Information IMPORTANT NOTE: When a refrigerator or freezer door is left open for a long time, the lights may go off. This protects the internal parts from overheating. To reset the light system, close the door for 15-30 minutes. Your Sub-Zero built-in unit contains unique 40-watt appliance bulbs in the refrigerator and freezer sections. Shut off power at the control panel before changing light bulbs. Wear protective gloves when handling bulbs. OVERHEAD LIGHTING To replace the light bulbs, you will need to remove the light diffuser in the top of the unit. Place your hands under the light diffuser and slide back firmly, until the slots on the sides of the diffuser drop past the bracket pegs. Lower the light diffuser to remove. Refer to the illustration below. To reinstall, align the slots of the light diffuser onto the bracket pegs. Then pull forward fully so the tabs on the slots engage the pegs on the bracket. Models BI-36RG, BI-30UG and BI-36UG: Like all built-in units, lights in glass door models will fully illuminate when the door is open. With models BI-36RG, BI-30UG and BI-36UG, however, you have the option of having subdued lighting even with the door closed. You can easily turn this feature off by pressing the LIGHT ON/OFF key pad on the control panel. The indicator will appear when accent lights are enabled. PEG SLOT Overhead lighting.