Stihl HT 102 Product Instruction Manual - Page 22
Chain Lubricant, Filling Chain Oil Tank
![]() |
View all Stihl HT 102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
002BA575 KN English Chain Lubricant Filling Chain Oil Tank Opening For automatic and reliable lubrication of the chain and guide bar - use only an environmentally compatible quality chain and bar lubricant. Rapidly biodegradable STIHL BioPlus is recommended. NOTICE Biological chain oil must be resistant to aging (e.g. STIHL BioPlus), since it will otherwise quickly turn to resin. This results in hard deposits that are difficult to remove, especially in the area of the chain drive and chain. It may even cause the oil pump to seize. The service life of the chain and guide bar depends on the quality of the lubricant. It is therefore essential to use only a specially formulated chain lubricant. WARNING Do not use waste oil. Renewed contact with waste oil can cause skin cancer. Moreover, waste oil is environmentally harmful. NOTICE Waste oil does not have the necessary lubricating properties and is unsuitable for chain lubrication. NOTICE A full chain oil tank is sufficient for only half a tankful of fuel. Check the oil level regularly during cutting work. Never allow the oil tank to run dry. Preparations N Thoroughly clean the tank cap and the area around it to ensure that no dirt falls into the tank. N Position the machine so that the tank cap faces up. 246BA026 KN N Raise the grip until it is upright. N Turn the cap counterclockwise (about a quarter turn). Marks on tank cap and oil tank must line up. 0000-GXX-0136-A0 0000-GXX-0137-A0 KN 20 HT 102, HT 103, HT 132, HT 133
![](/manual_guide/products/stihl-ht-102-product-instruction-manual-f9ab27b/22.png)