Singer Prelude 8280 User Manual - Page 59

Multi-stitch zig-zag, Bar tack

Get Singer Prelude 8280 PDF manuals and user guides View all Singer Prelude 8280 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

4 3 21 0 1 2 GB Multi-stitch zig-zag Sewing on lace and elastic, darning, mending, reinforcing edges. Set the stitch pattern dial to " ". Place patch in position. The stitch length can be shortened to produce very close stitches. (1) When mending tears, it is advisable to use a piece of backing fabric to reinforce. The stitch density can be varied by adjusting the stitch length. First sew over the center and then overlap on both sides. Depending on the type of fabric and damage, sew between 3 and 5 rows. (2) Bar tack Set the stitch pattern dial to " " or " ". Set the stitch length dial to "1" - "1.5". This function is used to secure the tops of kick pleats, as well as pocket openings. First use a straight stitch across the top of the pocket or pleat. This seam should be approximately 1/4 to 1/2 of an inch long. Set stitch to zigzag and stitch over the straight stitch backstitch at the beginning and end of stitch to secure ends. 52

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
52
GB
Multi-stitch zig-zag
Sewing on lace and elastic, darning, mending, reinforcing edges.
Set the stitch pattern dial to "
".
Place patch in position. The stitch length can be shortened to
produce very close stitches. (1)
When mending tears, it is advisable to use a piece of backing
fabric to reinforce. The stitch density can be varied by adjusting
the stitch length. First sew over the center and then overlap on
both sides. Depending on the type of fabric and damage, sew
between 3 and 5 rows. (2)
Bar tack
Set the stitch pattern dial to "
" or "
".
Set the stitch length dial to "1" - "1.5".
This function is used to secure the tops of kick pleats, as well as
pocket openings. First use a straight stitch across the top of the
pocket or pleat. This seam should be approximately 1/4 to 1/2
of an inch long. Set stitch to zigzag and stitch over the straight
stitch backstitch at the beginning and end of stitch to secure
ends.
1
2
0
1
2
3
4