Singer Prelude 8280 User Manual - Page 53

Sewing on buttons

Get Singer Prelude 8280 PDF manuals and user guides View all Singer Prelude 8280 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

1 2 GB Sewing on buttons Install the darning plate. (1) Change presser foot to button sewing foot (1). Position the work under the foot. Place the button in the desired position and lower the foot. Set the pattern selector knob on " " and sew a few securing stitches. Select one of the two narrow zig zag patterns according to the distance between the two holes of the button. Turn the handwheel to check if the needle goes into the right and the left hole of the button without hitting the button. Slowly sew on the button with about 10 stitches. Select pattern " " and sew a few securing stitches (2). If a shank is required, place a darning needle on top of the button and sew (3). For buttons with 4 holes, sew through the front two holes first (2), push the work forward and then sew through the back two holes (3). 3 46

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
Install the darning plate. (1)
Change presser foot to button sewing foot (1).
Position the work under the foot.
Place the button in the desired position and lower the foot.
Set the pattern selector knob on "
" and sew a few securing
stitches. Select one of the two narrow zig zag patterns according
to the distance between the two holes of the button. Turn the
handwheel to check if the needle goes into the right and the left
hole of the button without hitting the button. Slowly sew on the
button with about 10 stitches.
Select pattern "
" and sew a few securing stitches (2).
If a shank is required, place a darning needle on top of the
button and sew (3). For buttons with 4 holes, sew through the
front two holes first (2), push the work forward and then sew
through the back two holes (3).
46
GB
Sewing on buttons
3
2
1