Sharp XG-PH50X XG-PH50X Operation Manual - Page 84
Enter the same keycode in Recon, the new keycode in New Code.
View all Sharp XG-PH50X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Using the "Options (1)" Menu Note • If you input a wrong keycode, the cursor returns to the first point of the "Old Code". • The preset keycode is 4 " buttons on the projector. If this keycode is set, the keycode input screen does not appear when turning the power on. 3 Press the 4 buttons on the remote control or on the projector to enter the new keycode in "New Code". Note • You cannot use the following buttons for keycode: • ON button • STANDBY button • ENTER button • L-click button • R-click/UNDO button • MENU button • ZOOM buttons • FOCUS buttons • H & V LENS SHIFT button • System Lock function recognizes each button on the remote control or on the projector as an individual button, even if they share the same button name. If you set the keycode with the buttons on the projector, use only those buttons on the projector. If you set the keycode with the buttons on the remote control, use only those buttons on the remote control. 4 Enter the same keycode in "Recon- firm". Note Not displaying the keycode input screen when turning the projector on • Press " on the projector for four times in steps 2 and 3 above. When the System Lock is set • When System Lock is set, the keycode input screen appears after the power is turned on. When it appears, enter the right keycode to start projection. Failure to enter the keycode will cause images not to be projected even when signals are entered to the projector. -80 Changing the keycode 1 Press the 4 buttons on the remote control or on the projector to enter the preset keycode in "Old Code". 2 Press the 4 buttons on the remote control or on the projector to enter the new keycode in "New Code". 3 Enter the same keycode in "Recon- firm".