Sharp XG-PH50X XG-PH50X Operation Manual - Page 12
Ensure that you read the following safeguards when, setting up your projector., a high position - sale
![]() |
View all Sharp XG-PH50X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
IMPORTANT SAFEGUARDS Ensure that you read the following safeguards when setting up your projector. Caution concerning the lamp unit ■ Potential hazard of glass particles if lamp rup- tures. In case of lamp rupture, contact your nearest Sharp Authorized Projector Dealer or Service Center for replacement. See "Replacing the Lamp" on page 93. The projector may be safely tilted to a maximum angle of 9 degrees. ■ Placement should be within 9 degrees of horizontal. If you have application requiring tilt angle exceeding 9 degrees, please check with your local Sharp sales office. 9° Caution concerning the setup of the projector ■ For minimal servicing and to maintain high image quality, SHARP recommends that this projector be installed in an area free from humidity, dust and cigarette smoke. When the projector is subjected to these environments, the vents and lens must be cleaned more often. As long as the projector is regularly cleaned, use in these environments will not reduce the overall operation life of the unit. Internal cleaning should only be performed by a Sharp Authorized Projector Dealer or Service Center. Do not set up the projector in places exposed to direct sunlight or bright light. ■ Position the screen so that it is not in direct sunlight or room light. Light falling directly on the screen washes out the colors, making viewing difficult. Close the curtains and dim the lights when setting up the screen in a sunny or bright room. Warning about placing the projector in a high position ■ When placing the projector in a high posi- tion, ensure to secure it carefully to avoid personal injury caused by the projector falling down. Do not subject the projector to hard impact and/or vibration. ■ Take care with the lens so as not to hit or damage the surface of the lens. Rest your eyes occasionally. ■ Continuously watching the screen for long hours will cause eye strain. Ensure to occasionally rest your eyes. Avoid locations with extremes of temperature. ■ The operating temperature of the projector is from 41°F to 104°F (+5°C to +40°C). ■ The storage temperature of the projector is from -4°F to 140°F (-20°C to +60°C). -8
![](/manual_guide/products/sharp-xgph50x-xgph50x-operation-manual-4fbe877/12.png)