Sharp UX-600M UX-600M Operation Manual - Page 85
Using a Program key, To cancel a programmed timer operation
View all Sharp UX-600M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Chapter 8 Special Functions Using a Program key A programmed operation is performed as follows: 1 Load the document. 2 Press the appropriate Program Key. 16/P1 35 (Example) Note: A maximum of 2 timer operations can be set at any one time, including both timer operations set by pressing a Program Key and operations set as described in "Timer Operations" in this chapter. To cancel a programmed timer operation If a Program Key has been pressed for a timer operation and you need to cancel the operation before it is performed, follow these steps: 1 Press the Program Key. 16/P1 35 (Example) 2 Press the START key. START 73
Using a Program key
A programmed operation is performed as follows:
1
Load the document.
2
Press the appropriate Program Key.
Note:
A maximum of 2 timer operations can be set at any one time, including
both timer operations set by pressing a Program Key and operations set as de-
scribed in "Timer Operations" in this chapter.
To cancel a programmed timer operation
If a Program Key has been pressed for a timer operation and you need to cancel
the operation before it is performed, follow these steps:
1
Press the Program Key.
2
Press the
START
key.
START
16/P1
35
(Example)
16/P1
35
(Example)
Chapter 8
Special Functions
73