Sharp UX-600M UX-600M Operation Manual - Page 42
Storing numbers in Group Keys
View all Sharp UX-600M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Chapter 2 Initial Settings Storing numbers in Group Keys Group Keys allow you to dial a group of fax numbers by simply pressing the appropriate Group Key once. They are convenient for the Broadcasting function, which is used to transmit a document to a group of fax machines. Rapid Keys 18/G1 and 19/G2 can be programmed as Group Keys. To program or clear a Group Key, follow the steps below. Note that one key cannot be simultaneously programmed as both a Rapid Key and a Group Key. ♦ Up to 20 fax numbers can be stored in one Group Key. ♦ Only Speed Dial numbers can be stored in a Group Key. Full numbers cannot be stored. ♦ A Group Key cannot be cleared if it is has been programmed into a Program Key. First clear the Program Key as described in "Entering and Using Programs" in Chapter 8, then clear the Group Key. If you need to check which Program Key the Group Key is used in, print out the Program and Group List as described in Chapter 10. 1 Press the keys shown at right. GROUP ENTRY MODE will appear in the display. 2 Press "1" to program a Group Key, or "2" to clear a Group Key. FUNCTION 7 1 or 2 3 Press a Group Key (Rapid Key 18/G1 or 19/G2) to select it. If you are clearing the key, go to Step 5. 4 Enter the Speed Dial numbers of the re- ceiving machines. 5 Press the START key. 18/G1 37 (Example) 01 START 02 (Example) 6 Return to Step 3 to program or clear an- other Group Key, or press STOP to exit. 30 STOP Step 3 or