Sharp PN-L805H Operation Manual - Page 67
Specifications, Dimensional Drawings, Power management
View all Sharp PN-L805H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
nDimensional Drawings Note that the values shown are approximate values. 3-7/8 [98] 3-9/16 [91] 73-3/8 [1863] Opening width (70-5/16 [1786.4]) Specifications 1-13/16 [46] VESA holes 11-13/16 11-13/16 [300] [300] Unit: inch [mm] 46-1/8 [1172] 44-3/16 [1123] 42-15/16 [1090] Opening height (39-11/16 [1008.2]) 7-7/8 7-7/8 [200] [200] 2-7/16 [62] 33-1/4 [844] When mounting the monitor, be sure to use a wall-mount bracket that complies with the VESA-compatible mounting method. SHARP recommends using M6 screws and tighten the screws. Note that screw hole depth of the monitor is 3/8 inch (10 mm). Loose mounting may cause the product to fall, resulting in serious personal injuries as well as damage to the product. The screw and hole should come together with over 5/16 inch (8 mm) length of thread. Use a bracket which has been approved for UL1678 standard, and which can endure at least 4 times or more the weight of the monitor. nPower management This monitor conforms to VESA DPMS. Both your video card and computer must support the same standard in order for the monitor's power management function to work. DPMS: Display Power Management Signaling DPMS ON STATE STANDBY SUSPEND OFF STATE Screen Display No display Power consumption 325 W 7.0 W* Hsync Yes No Yes No Vsync Yes Yes No No * When CONNECT AUTO INPUT SELECT and NO SIGNAL AUTO INPUT SEL. are set to OFF. 67 E