Sharp PG-D3510X PG-D2710X PG-D3010X PG-D3510X Operation Manual - Page 57

Menu operation n Page 40 Setting the FUNCTION Button Operation You can assign one of the following functions to the FUNCTION button on the remote control. The assigned function can be performed by just pressing FUNCTION. Selectable items Input Search Audio Mute Image Shift Signal Info Description Automatically searches for and switches to the appropriate Input mode. For temporarily turning off the sound. Press FUNCTION again to turn on the sound For moving the projected image vertically. (See page 47.) Input signal information is displayed. STANDBY Mode When set to "Eco", power consumption is reduced in Standby mode. Selectable items Description Eco The monitor output, RS-232C and Network functions are switched off in Standby mode. Quick Start The monitor output, RS-232C and Network functions are activated even if the projector is in Standby mode. Returning to the Default Settings This function allows you to initialize the settings you have made in the projector. Note • The following items or menu cannot be initialized. - Resolution - Language - Lamp Timer (Life) - System Lock - COMPUTER2 Select Checking the Lamp Life Status You can confirm the cumulative lamp usage time and the remaining lamp life (percentage). Lamp usage condition Remaining lamp life "Life" 100% 5% Operated exclusively with "Eco+Quiet" set to "On" Approx. Approx. 4,000 hours 200 hours Operated exclusively with "Eco+Quiet" set to "Off" Approx. Approx. 2,000 hours 100 hours DLP® LinkTM See the OPERATION MANUAL FOR STEREOSCOPIC 3D PROJECTION provided separately. DLP® LinkTM Invert See the OPERATION MANUAL FOR STEREOSCOPIC 3D PROJECTION provided separately. Note • It is recommended that the lamp be changed when the remaining lamp life becomes 5%. • The lamp life may vary depending on the usage condition. Useful Features 53