Sharp PG-D3510X PG-D2710X PG-D3010X PG-D3510X Operation Manual - Page 29
Connecting the Power Cord
UPC - 074000365889
View all Sharp PG-D3510X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
When connecting to the LAN terminal using a LAN cable LINK LED (green) Illuminates when linked. TX/RX LED (yellow) Illuminates when transmitting/receiving data. * To ensure safety, do not connect the LAN terminal with any cables that may cause excessive voltage such as a telephone line. Hub or Computer To LAN terminal LAN cable (Category 5 type, commercially available) Note • When connecting to a hub, use a straight-through Category 5 (CAT.5) type cable (commercially available). • When connecting to a computer, use a cross-over Category 5 (CAT.5) type cable (commercially available). Connections Connecting the Power Cord Plug the supplied power cord into the AC socket on the rear of the projector. Then plug into AC outlet. Power cord (supplied) AC socket To AC outlet 25