Sharp PG-D3510X PG-D2710X PG-D3010X PG-D3510X Operation Manual - Page 33
Correcting Trapezoidal Distortion, Basic, Operation
UPC - 074000365889
View all Sharp PG-D3510X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Correcting Trapezoidal Distortion When the image is projected either from the top or from the bottom towards the screen at an angle, the image becomes distorted trapezoidally. The function for correcting trapezoidal distortion is called Keystone Correction. Note • The Keystone Correction can be adjusted up to an angle of approximately ±40 degrees and the screen can also be set up to an angle of approximately ±40 degrees. Adjustment buttons (P/R/O/Q) RETURN button KEYSTONE button 1 Press KEYSTONE to enter the Keystone Correction mode. 2 Press P/Q or O/R to adjust the Keystone Correction. On-screen display (Keystone Correction mode) KEYSTONE 0 ADJUST END Shrinks upper side. (Move the slide bar in the + direction.) Note • To return to the default setting, press RETURN while the on-screen display of the Keystone Correction mode is on the screen. 3 Press KEYSTONE. • The on-screen display of the Keystone Correction mode will disappear. Shrinks lower side. (Move the slide bar in the - direction.) Info • While adjusting the image using Keystone Correction, straight lines and the edges of the image may appear jagged. Basic Operation 29