Sharp PG-D3510X PG-D2710X PG-D3010X PG-D3510X Operation Manual - Page 54
Adjusting the Projector Function (“PRJ-ADJ1/2” Menu), Auto Sync (Auto Sync Adjustment)
UPC - 074000365889
View all Sharp PG-D3510X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Adjusting the Projector Function ("PRJ-ADJ1/2" Menu) Q PRJ-ADJ1 Pict. SIG 1 Auto Sync 2 Auto Power Off 3 Auto Restart 4 Speaker 5 RS-232C 6 Fan Mode 7 System Lock 8 Keylock SCR PRJ-ADJ1 PRJ2 Net. On On On On 9600bps Normal Disable Off Q PRJ-ADJ2 Menu operation n Page 40 Pict. SIG SCR 9 Quick Start Menu 0 COMPUTER2 Select FUNCTION Button STANDBY Mode PRJ1 PRJ-ADJ2 Net. On Monitor Output Input Search Quick Start DLP® Link TM Off DLP® Link TM Invert All Reset SEL./ADJ. ENTER END Lamp Timer(Life) SEL./ADJ. 0h ENTER 0 min 100% END 1 Auto Sync (Auto Sync Adjustment) Selectable items Description On Auto Sync adjustment will occur when the projector is turned on or when the input signals are switched, when connected to a computer. Off Auto Sync adjustment is not automatically performed. Note • Auto Sync adjustment is also performed by pressing AUTO SYNC. • The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector. • When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page 45.) 2 Auto Power Off Function Selectable items Description On When no input signal is detected for more than 15 minutes, the projector will automatically enter Standby mode. Off The Auto Power Off function will be disabled. Note • When the Auto Power Off function is set to "On", 5 minutes before the projector enters Standby mode, the message "Enter STANDBY mode in X min." will appear on the screen to indicate the remaining minutes. 50 3 Auto Restart Function Selectable items Description On If the power cord is unplugged from the outlet or the breaker switch is turned off when the projector is on, then the projector automatically turns on when the power cord is plugged into the AC outlet or the breaker switch is turned on. Off The projector does not turn on automatically when the power cord is plugged into the AC outlet or the breaker switch is turned on. 4 Speaker Setting Selectable items Description On The audio signal is output from the internal speaker. Off The audio signal is not output from the internal speaker. 5 Selecting the Transmission Speed (RS-232C) Make sure that both the projector and computer are set for the same baud rate. Selectable items Description 9600bps Transmission speed is slow. 38400bps 115200bps Transmission speed is rapid.