Sharp MX-M4071 User Manual - Page 819

SETTING MODE►SETTING MODE FOR FAX SETTING MODE FOR FAX The following lists the Setting mode for fax and factory default settings. Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings. System Settings Setup Items ■ System Settings ● Image Send Settings  Fax Settings  Condition Settings • Resolution Setting - Apply the Resolution Set when Stored + (Resolution) - Half Tone • Dial Mode Setting - Auto Select • Auto Wake Up Print • Pause Time Setting • Fax Dest. Confirmation Mode - Apply to Addresses Other Than Fax - Require Re-entry when Directly Entering the Fax Destination • Remote Reception Number Setting • Original Print on Transaction Report • Transaction Report Print Select Setting - Single Sending - Broadcasting - Receiving - Confidential Reception • Activity Report Print Select Setting - Auto Print at Memory Full - Print Daily at Designated Time U: General user; A: System administrator/Administrator Factory default setting U A Page No Disabled No Standard No Disabled No Tone No - No Enabled No 2 seconds No Disabled No - No Enabled No 5 No Print Out Error Report Only No No Print Out Error Report Only No Print Out All Report No No Printed Report No Print Out Notice Page No No Disabled No Disabled No Yes Yes 4-51 Yes Yes Yes Yes 4-3 Yes Yes 4-10 Yes Yes 4-26 Yes Yes 4-102 Yes 7-71 Yes Yes Yes 4-80 Yes Yes Yes Yes 4-104 Yes 7-122