Sharp MX-M4071 User Manual - Page 224

COPIER►BASIC PROCEDURE FOR MAKING COPIES 7 Others Repeat Layout Auto Layout of Repeat Face Based on Original, Paper Size and Ratio. Off Auto Repeat Fixed Repeat Photo Repeat Current Setting Original Paper Select Copy Ratio Auto A4 8½x11 100% No. of Faces Layout Layout w/o spacing Parting Line Off Back Original Change Size/Direction. BCaoclokrgMrooudned Adjustment EBxapcoksguroreund Adjustment Select Type/Exposure Exposure Select Type/Exposure Preview CA B/W Start Color Start Start Specify the repeat partition line. After the settings are completed, tap sequence. and [Back] keys in • To cancel the Auto Repeat setting: Tap the [Off] key. • To cancel all settings: Tap the [CA] key. 8 Tap the [Start] key to start copying. Copy by specifying a repeat count (Fixed Repeat) 1 Perform steps 1 to 3 in Copy by automatically calculating the repeat count (Auto Repeat) (page 2-52). 2 Tap the [Fixed Repeat] key. 3 Tap the [Original] and [Paper Select] keys to select an original size and a paper size, respectively. ► SELECTING THE ORIENTATION AND SIZE OF THE ORIGINAL (page 2-29) ► SELECTING THE PAPER TRAY FOR COPYING (page 2-12) 4 Others Repeat Layout No. of Faces Back 2 Repeat 4 Repeat 8 Repeat 16 Repeat 11x17 Original Change Size/Direction. Background Adjustment Exposure Select Type/Exposure Preview CA Start Tap [No. of Faces] to set a repeat count. After the settings are completed, tap . The automatic calculation result is shown as the copy ratio. If the calculated copy ratio exceeds the range from 25% to 400% (using document glass) or 25 to 200% (using automatic document feeder), an error occurs. 2-53