Sharp MX-B376WH MX-B376W MX-B476W User Manual - Page 726
Print Port Settings
![]() |
View all Sharp MX-B376WH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 726 highlights
SETTING MODE►SYSTEM SETTINGS TRAP Community Enter the community name to be used for the SNMP TRAP sent from the device. TRAP Target Address Enter the IP address of the destination computer for SNMP TRAP communication. SNMP v3 Settings SNMP v3 Settings Set this option to use the SNMPv3 settings. User Name Enter the user name. Authentication Key Enter the authentication key. Privacy Key Enter the privacy key. Context Name Display the context name. SMB Settings Set the version of SMB protocol that is used for functions such as Scan to Network Folder. Use this setting to connect to a device that cannot automatically change the SMB protocol version, or when there is a problem in the connection with another device due to different versions. Set the version to SMB2.0, SMB2.1, or SMB3.0. • One of the settings is SMB1.0, however, this is always enabled and cannot be disabled. • When a version is disabled, version settings higher than that version are all disabled. When a version is enabled, all version settings lower than that version are enabled. Print Port Settings LPD Enter a profile expiring date. LPD Settings LPD Set this option to use LPD. Timeout Enter a timeout. The default setting is 90 seconds. Use Banner Set this option to use the banner. The default setting is "Invalid". RAW Raw Print Settings Raw Print Set this option to use Raw printing. The default setting is "Valid". Port Number Enter a port number. The default setting is port 9100. Timeout Enter a timeout. The default setting is 90 seconds. Use Bidirectional To use bidirectional communication, set to . 7-93
![](/manual_guide/products/sharp-mxb376w-mxb376w-mxb476w-user-manual-d5a7b97/726.png)