Sharp MX-B376WH MX-B376W MX-B476W User Manual - Page 138

COPIER►BEFORE USING THE MACHINE AS A COPIER Default settings for copying Set in "Default Settings" of "Copy Settings" in the System Settings. You can set a default value for each copy setting. Initial Status Settings selected with these settings apply to all functions of the machine (not just the copy function). The copier settings are reset to the initial state when the [Power] button is turned on, when the [CA] key is tapped, or when the auto clear interval has elapsed. These settings are used to change the default settings for copy mode. The following settings can be changed: Item Description Image Orientation Paper Tray Exposure Type Copy Ratio Select magnification automatically according to paper size, when paper tray is selected. 2-Sided Copy Original Binding Output Binding Output Staple Separator Page Factory defaults Specify the original orientation. Specify the paper tray that is selected by default. Configure default exposure mode settings. Specify the copy ratio that is selected by default. Enable magnification automatically in default when changing the paper tray. Configure the 2-sided mode settings that are selected by default. If this setting is used to change the default setting for the duplex function to any setting other than "1-Side to 1-Side" and the duplex function or automatic document feeder fails or is disabled, the setting will revert to "1-Side to 1-Side". Set the original binding in 2-Sided copy. Set the output binding in 2-Sided copy. Set the print output method that is selected by default. Configure staple settings. Separator pages can be inserted before or after jobs. Set the paper tray used for the separator pages. This returns all items to the factory default settings. 2-8