Sharp LL-T2020B Operation Manual - Page 26

Specifications Product specifications LCD display 51 cm measured diagonally Advanced Super-V and Anti Glare Low Reflection TFT LCD module Resolution (max.) UXGA 1600 x 1200 pixels Displayable colors (max.) Approx. 16.77 million colors (8 bit) Brightness (max.) 220cd/m2 Dot pitch 0.255(H) x 0.255(V) mm Contrast ratio 350:1 Angle of visibility Left-right 170° ; Up-down 170° (contrast ratio >= 10) Screen display size Horizontal 408 mm x Vertical 306 mm Video signal Analog: Analog RGB (0.7Vp-p) [75Ω] Digital: DVI standard based on 1.0 Sync signal Separate Sync (TTL level: +/-), Sync on Green, Composite Sync (TTL level: +/-) Expansion compensation Digital scaling (Enlargement VGA/SVGA/XGA/SXGA etc. to full screen size. ) Plug & Play VESA DDC2B compatible Power management VESA: based on DPMS DVI: based on DMPM Input signal terminal 29 pin DVI-I x 2 USB hub function 1 upstream port, 2 downstream ports (selfpowered hub based on USB standard Rev 1.1) Height adjustment Adjustment range: Approx. 60 mm Screen rotation Clockwise 0 - 90° Screen tilt Upward approx. 0 -30° ; downward approx. 0 - 5° Screen swivel Approx. 90° from left through right Power supply AC100 - 240V, 50/60Hz Temperature of operating environment 5 - 35° C Power consumption 53W (Not using USB hub) (60W maximum, 3W when in power-saving mode) 550 490 450 498 438 348 Dimensions (W x D x H) (Units: mm) With long width screen: 450 x 228 x 438 - 498 With long heightscreen: 348 x 228 x 490 - 550 Weight Approx. 10 kg Display area only, approx. 6.5kg Dimensions (Units: mm) 450 310 348 228 - Analog signal cable: Approx. 2.0m - Digital signal cable : Approx. 2.0m - USB cable : Approx. 2.0m - Digital signal cable, NL-C04J (purchased separately): Approx. 2.0m - Analog signal cable, NL-C02E (purchased separately): Approx. 2.0m - 2-input cable, NL-C03J (purchased separately): Approx. 0.25m 26