Sharp LL-T2020B Operation Manual - Page 20
Mode Select, 1 Men
![]() |
UPC - 074000047358
View all Sharp LL-T2020B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Adjusting the screen display (With analog connection) COOL ..... Color tone bluer than standard Color tone slightly bluer than standard STD ........ Color tone standard setting Color tone slightly redder than standard WARM .... Color tone redder than standard USER R-CONTRAST ........ G-CONTRAST ........ B-CONTRAST ......... button for blue-green button for red button for purple button for green button for yellow button for blue GAMMA Adjust so that dark and bright images are easy to see. If the screen is dark and hard to see, increase the numerical value. If it is bright and hard to see, lower the numerical value. ( buttons) MODE SELECT-1 Menu M O D E S E L E C T- 1 I N F O R M AT I O N OFF TIMER I N P U T- 1 I N P U T- 2 1LINE 1LINE 2LINES 2LINES I N P U T- 1 A N A L O G 1600 x 1200 V:60Hz H:75kHz Notes: - To choose a menu option: button - To go to the next menu: MENU button INFORMATION A model name (MODEL), a serial no. (S/N), and usage time (USAGE TIME) of the monitor can be checked. After selecting [INFORMATION], press the button (Checking done: MENU button) HUE Hue can be adjusted. ( buttons) SATURATION Color saturation can be adjusted. ( buttons) At the minimum value, the screen is black and white. 6 COLORS Hue (HUE) and saturation (SATURATION) may be adjusted by color. (RED, YELLOW, GREEN, CYAN, BLUE, MAGENTA) 1.After selecting [6 COLORS], press the button. The color selecting menu appears. 2.Use the button to select the color to be adjusted and press the button. 3.Use the button to select the item to be adjusted and adjust by pressing the buttons. 4.Press the MENU button. The display returns to the color selecting menu. To adjust other colors, repeat the procedure from 2. 5.Press the MENU button to return to the COLOR CONTROL menu. OFF TIMER Power is automatically shut off when the set time elapses. After selecting [OFF TIMER], press the button and set [ON] / [OFF] by pressing the buttons. If selecting [ON], press the button and set the shut-off time by pressing the buttons. (Between 1 and 23 hours may be set, by the hour.)(Setting done: MENU button) - When [ON] is selected, the remaining time is displayed in the upper right of the screen during the last 5 minutes before the shut-off. (The remaining time is displayed for approx. 5 seconds, on each minute) - To clear automatic shut-off temporarily, press the power button between the display of remaining time and the shut-off of power. To subsequently turn the power off, press the power button again. (When next turning on power, power is again automatically shut off when the set time elapses.) - If the monitor is turned on when the OFF TIMER is set to ON, the set time appears on the display for several seconds. (If there is no input signal, [NO SIGNAL] is displayed.) INPUT-1, INPUT-2 Set [1 LINE] when connecting digital or analog signal cables to a DVI-I input terminal on the display. Set [2LINES] when connecting a 2-input cable. ( buttons) - If the connections and settings are not correctly set, the screen will not be correctly displayed. 20
![](/manual_guide/products/sharp-llt2020b-operation-manual-339ebf5/20.png)