Sharp BP-50M45 Operating Manual - Page 833

SETTING MODE►SYSTEM SETTINGS Port Switching Method Selects when port switching takes place. • Switch at End of Job The port changes to auto selection when printing ends. • Switch after I/O Timeout When the time set in "I/O Timeout" elapses, the port changes to Auto Selection. Factory default settings: Switch at End of Job Initial Status Settings If you print data in an environment where the printer driver is not used (that is, if you print data using the MS-DOS system or if you print data using the PC that does not have the provided printer driver installed), set the detailed printing conditions. (However, the "Disable Blank Page Print" function will be effective even when the PCL printer driver is used.) Settings Setting item Copies Orientation Paper Size Output tray Paper Type Resolution Setting Disable Blank Page Print Duplex printing Description 1 - 9999 sets Portrait Landscape Factory default settings: Portrait Set the default paper size. Factory default settings: Varies depending on the machine configuration Set the default delivery tray. Factory default settings: Varies depending on the machine configuration Set the default paper type. Factory default settings: Plain Paper 1 600dpi 600dpi (High Quality) 1200dpi*1 Factory default settings: 600dpi (High Quality) (Enabled) (Disabled) Factory default settings: It does not prohibit 1-Sided 2-Sided (Booklet) 2-Sided (Tablet) Factory default settings: Portrait 9-67