Sharp BP-50M45 Operating Manual - Page 275
Specify the copy function to be stored., Tap [Program Registration] on the action panel., Tap an
View all Sharp BP-50M45 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 275 highlights
COPIER►CONVENIENT COPY FUNCTIONS When a job program is not stored Set reduction from 11" x 17" (A3) to 8-1/2" x 11" (A4) When a job program is stored Retrieve the stored program. Change the exposure setting. Tap the [Start] key. Set 2-sided copying. Set margins. Set punch hole settings. Tap the [Start] key. Considerable time is required to copy the drawings each month because the above settings must be selected. In addition, mistakes are occasionally made when selecting the settings, so some copies must be redone. The settings are stored in a program, so they can be selected by the touch of a key. This is simple and takes no time. In addition, the settings are all stored so there are no chances for mistakes, and thus no need to redo copies due to setting mistakes. • Up to 48 programs can be stored. • Program settings remains registered even when the main power has been turned off. • A program can also be stored in the home screen or favorite as a shortcut; therefore, it is helpful when retrieving it. 1 Specify the copy function to be stored. In the base screen, display [Program Registration] on the action panel. 2 Tap [Program Registration] on the action panel. 3 Program Registration Select Program No. to Register. OK 01 01 Pre-Setting Program 02 02 03 03 04 04 05 05 06 06 07 07 08 08 09 09 10 10 Tap an unused key. A key with a program stored is displayed in color. Tap a key with no program stored. If you do not set a name for the program, a serial number will be automatically assigned as the name. 3-131