Sharp BP-50M26 Operating Manual - Page 770

SETTING MODE►SETTING MODE From the setting mode of the machine, print the IP address of the machine and enter the address on the PC's Web browser. 1 Tap the [System Info.] key. 2 Status Machine Identification Total Count Device Status Network Status Firmware Version Power Reset Data List List for User List for Administrator User Control System Settings Status > Network Status TCP/IP TCP/IP: IPv4 Settings: DHCP: IPv4 Address: Subnet Mask: Default Gateway: IPv6 Settings: Enable Enable xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx Administrator Login Check the IP address in the machine information. Top of Page 3 Start the Web browser on the PC, and enter the IP address of the machine. Start a Web browser on a PC on the same network the machine is on, and enter the IP address of the machine. Recommended Web browsers: Internet Explorer: 11 or higher (Windows®), Microsoft Edge (Windows®), Firefox (Windows®), Safari (Mac OS®) Chrome (Windows®) Latest version and previous major release Displays the setting mode (Web version). In the factory default state, the user password must be entered. Depending on the machine settings, user authentication may be required to display the setting mode (Web version). For password and other information required for user authentication, contact the administrator of the machine. 9-4