Sharp BP-50M26 Operating Manual - Page 1019

TROUBLESHOOTING►GENERAL PROBLEMS PRINTING DOES NOT TAKE PLACE AFTER RECEPTION Check Does a password entry screen appear? Has cut-off printing been disabled in the setting mode (administrator)? Is forwarding (Inbound Routing function) enabled for a received fax? Is the paper other than the size that can be printed by fax reception loaded?  Solution ■ Enter the correct password using the numeric keys. [Hold Setting for Received Data Print] is enabled. If you do not know the password, check with your administrator.  "Settings (administrator)" → [System Settings] → [Image Send Settings] → [Common Settings] → [Condition Settings] → [Hold Setting for Received Data Print] ■ Load the same size of paper as the received fax. If [Print Actual Size Cut off Disabled] is enabled in [Print Style Setting] in the setting mode (administrator) and a fax is received that is larger than any paper that is loaded, the fax will be received and stored in memory without being printed. (However, when a fax longer than A3 (11" x 17") size is received, it will be printed using multiple sheets of paper.)  "Settings" → [System Settings] → [Image Send Settings] → [Fax Settings] → [Receive Settings] → [Print Style Setting] ■ If you need to print a received fax, ask your administrator. When the Inbound Routing function is enabled, received faxes are automatically forwarded to a specified address. If [Print at Error] is selected when Inbound Routing is enabled, received faxes will only be printed when an error occurs.  "Settings (administrator)" → [Image Send Settings] → [Inbound Routing (Forwarding/Storing) Settings] → [Administration Settings] → [Inbound Routing Settings] ■ If the paper other than the size with 5-1/2" x 8-1/2"R, 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 13", 8-1/2" x 13-2/5", 8-1/2" x 14", 11" x 17", A4, A4R is loaded in the machine, printing does not take place even if a fax is received. Load the papers of the above size. MANUAL RECEPTION/POLLING RECEPTION ARE NOT POSSIBLE Check Is little free memory remaining?  Solution ■ If any of the following applies, print or delete received faxes to increase available memory space for receiving faxes. • The memory contains data that has been received with the received image check setting enabled. • The memory contains data that has been received with confidential reception or that is protected by a password. • A fax is stored in the memory box. 10-40