Rane Sixty-One Sixty-One Mixer Manual for Scratch Live 2.5.0 - Page 25
SP-6 Sample, Player
View all Rane Sixty-One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
SP-6 Sample Player The SP-6 Sample Player allows you to play up to six sources of audio, in addition to the tracks playing on the Virtual Decks. Any audio file in your Scratch Live library can be loaded to any one of the six slots, allowing playback of short samples, sound effects, or full length tracks. The SP-6 is enabled when the SixtyOne is plugged in, but not operational in the offline player mode. Click on the SP-6 button to access the sample player window. In the top right corner of the SP-6 there is a button which opens the Display Menu. Clicking on this drops down a menu with the list of available controls: • Mode: Chooses the play mode: Trigger / On-Off / Hold / Repeat modes. • Output Select: Assigns individual slot outputs to L (Left channel), A (Aux output), R (Right channel) or to the master output of the SP-6. • Pitch: Pitch Slider / Bend / Nudge / Keylock controls. • Play from: Choose which cue point / loop to use for the loaded track. • Overview: Displays the overview of each track. • Level: Individual sample slot level and Gain controls. • Level meter: Displays the volume level for the sample slot. Loading the SP-6 To load a track to the SP-6, drag and drop the desired file from your library into one of the sample slots. To eject a track, click the eject button to the right of the title display. TIP: You can load tracks to the SP-6 with the keyboard shortcuts: ctrl + alt + z to n. TIP: Select and drag six tracks from your library onto the first sample player slot to simultaneously load six tracks across all six slots. Playing Samples Pressing the play button on each slot will play the loaded audio. TIP: Use the shortcut keys z (slot 1) x (slot 2) c (slot 3) v (slot 4) b (slot 5) n (slot 6) to trigger each sample respectively. SP-6 Instant Doubles You can instant double from the Virtual Decks down to the SP-6, from the SP-6 up to the Virtual Decks and also between the sample slots themselves. This means the position, track gain and speed will match when you drag a track to from one location into another. This allows you to beat match tracks with your turntables/ CD players on the Virtual Decks, and then "instant double" the track down to a slot, freeing up the Virtual Decks to continue your mix with other tracks. Click and drag an already playing track from a Virtual Deck or sample slot and drop it on another sample slot to begin instant doubling. SP-6 Play Modes Each sample slot has three different play modes: Trigger mode - When play is pressed, the audio plays through until the end of the track. Pressing repetitively will trigger the audio from the beginning of the track. To stop the audio, hold the alt key while either clicking the play button, or pressing the corresponding shortcut key (e.g., alt - z for slot one). Hold Mode - The sample will only play while you press and hold the play button or the corresponding shortcut key. Upon release of the play button, the audio stops immediately. This mode most closely resembles the function of the "note off" mode found on many samplers. On / Off Mode - When play is pressed, the audio plays through until the end of the track. Pressing play again stops the audio. Repeat Mode - Each slot has a repeat button. When activated, this will repeat the loaded audio file from beginning to end, or will turn on the loop selected in the "Play From" field. TIP: Short "loop" samples can be turned into a continuous track using the repeat function. Ensure there is a clean cut at the start and end of a bar. TIP: If you don't wish to use the SP-6, you can disable it in the Plugins tab on the Setup screen. This enables you to set up the sample player with the appropriate controls that suit your workflow. RANE SIXTY-ONE MIXER FOR SERATO SCRATCH LIVE • OPERATOR'S MANUAL 2.5.0 25