Pioneer VSX-LX303 Instruction Manual English - Page 112

Contents ≫ Connections ≫ Playback ≫ Setup ≫ Setting Item Fixed PCM Default Value Off Setting Details Select whether to fix input signals to PCM (except multi-channel PCM) when you select "HDMI", "COAXIAL", or "OPTICAL" in the "Audio Select" setting. Set this item to "On" if noise is produced or truncation occurs at the beginning of a track when playing PCM sources. Select "Off" normally. • Each time the "Audio Select" setting is changed, the setting is restored to "Off". • The setting cannot be changed when "TUNER", "NET", "USB", or "BLUETOOTH" input is selected. Hardware „„HDMI Change the settings of the HDMI function. Setting Item HDMI CEC Default Value Off Setting Details Setting this to "On" enables the input selection link and other link functions with HDMI-connected CECcompatible device. "On": When this function is used "Off": When this function is not used When this setting is changed, turn off and then on again the power of all connected devices. • Depending on the TV to use, a link setting may be required on the TV. • This function is effective only when the device is connected to the HDMI OUT MAIN terminal. • Setting this to "On" and closing the operation screen will display the name of the connected CEC-compatible device and "CEC On" on the main unit's display. • When this is set to "On", the power consumption in standby mode may increase. (Depending on the TV status, the unit will enter the normal standby mode.) • If you operate the MASTER VOLUME dial on the main unit when this setting is "On" and audio is output from the TV speakers, audio will be output also from the speakers connected to this unit. To output audio from only either of them, change the setting of this unit or TV, or reduce the volume of this unit. • If abnormal behavior is observed when this is set to "On", set it to "Off". • If a connected device is not CEC-compatible, or if you are not sure whether it is compatible, set it to "Off". 112 Front Panel≫ Rear Panel≫ Remote≫