Pioneer VSX-LX303 Instruction Manual English - Page 106
Crossover
View all Pioneer VSX-LX303 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Setting Item Bi-Amp Speaker Impedance Default Value No 6ohms Setting Details Set whether the front speakers are bi-amp connected. "No": When front speakers are not bi-amp connected "Yes": When front speakers are bi-amp connected • This setting will be set to "No" in either of following cases. -- When 2 sets of height speakers are used -- When "Zone Speaker" is set to "Zone 2" or "Zone 2/Zone 3" Set the impedance (Ω) of the connected speakers. "4ohms": When any of the connected speakers have 4 Ω or more to less than 6 Ω impedance "6ohms": When the connected speakers all have 6 Ω or more impedance • For impedance, check the indications on the back of the speakers or their instruction manual. Crossover Change the settings of crossover frequencies. Setting Item Front Center Height 1 Default Value Small Small Small Setting Details Set the low range capabilities for each channel by setting either small or large. "Small": For small speakers whose low range capabilities may be limited "Large": For full-range speakers with sufficient low range capabilities • If "Configuration" - "Subwoofer" is set to "No", "Front" will be fixed to "Large" and the low pitched range of the other channels will be output from the front speakers. Refer to the instruction manual of your speakers to make the setting. Set the low range capabilities for each channel by setting either small or large. "Small": For small speakers whose low range capabilities may be limited "Large": For full-range speakers with sufficient low range capabilities • When "Front" is set to "Small", this is set to "Small". • If an item cannot be selected even though connection is correct, check that the settings in "Configuration" - "Speaker Channels" matches the number of connected channels. Set the low range capabilities for each channel by setting either small or large. "Small": For small speakers whose low range capabilities may be limited "Large": For full-range speakers with sufficient low range capabilities • When "Front" is set to "Small", this is set to "Small". • If an item cannot be selected even though connection is correct, check that the settings in "Configuration" - "Speaker Channels" matches the number of connected channels. 106 Front Panel≫ Rear Panel≫ Remote≫