Panasonic VB43060 VB43030 User Guide - Page 181

Section 700 - Operation Multi-Line (ML) Appearances (CPC-AII and CPC-B Version 2.0 or higher) Chapter 4. Key Telephone Features Description You can make and receive both CO line calls and Intercom Calls using a Multi-Line (ML) key. Each extension can have up to 24Multi-Line keys. The Attendant can have up to 24 Multi-Line keys. See "ML/MCO Separation" (page 4-66) for information on assigning both ML and MCO keys to the same system (CPC-AII and CPC-B Version 4 or higher). Operation Operation To originate a trunk call To place a call on Exclusive Hold (page 4-37) To place a call on System Hold (page 4-18) To transfer a call Action Press an idle ML key. The key blinks (green) as the call is made. Press the ML key. Press the HOLD key. Press HOLD, dial the destination extension, then press PROG. Related Programming • FF1 (System): Least Cost Routing (LCR) Access • FF2 (Trunks): Pooled Trunk Access for Group "9" • FF2 (Trunks): Pooled Trunk Access for Group "81-86" • FF3 (Extension): Forced Least Cost Routing • FF5 (Keys): FF Key Assignment (all) • FF8 (LCR) LCR Settings (all) Considerations • A Multi-Line key will ring for incoming CO calls, Intercom Calls, recall calls, and call-forward calls. DBS-2.3/9.2-700 DBS Manual - Revised April 2000 4-65