Panasonic VB43060 VB43030 User Guide - Page 177
DSS/BLF Appearances
View all Panasonic VB43060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Section 700 - Operation Chapter 4. Key Telephone Features DSS/BLF Appearances (CPC-AII and CPC-B Version 2.0 or higher) Description When a DSS/BLF key is programmed, it automatically provides direct station selection and busy lamp field for the assigned extension number. If desired, the DSS/BLF key can also provide ring monitor. For example, you can set extension A as a DSS/BLF key on extension B. When extension A rings, the LED of the DSS/BLF key on extension B flashes. If extension B answers the call by pressing the DSS/BLF key, the LED on extension A goes off and the call remains only on the DSS/BLF key of extension B. Ringing can be set on either one or both extensions. If the extensions are not set for ringing, the LED of the DSS/BLF key will flash red. If the extensions are set for ringing, the LED will flash green. When extension A is in use, the LED of the DSS/BLF key on extension B will light red. If one extension has the Absence Message, Call Forwarding, or DoNot-Disturb feature activated, the DSS/BLF key will light green. Operation To assign a DSS/BLF key: 1. Press the PROG key. 2. Press the FF key you want to assign the DSS/BLF appearance to. 3. Dial the extension number. 4. Press the HOLD key. To make an intercom call using the DSS/BLF key: Press the idle DSS/BLF key. To pick up a call on a DSS/BLF key: Press the flashing DSS/BLF key. DBS-2.3/9.2-700 DBS Manual - Revised April 2000 4-61